ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 30 results ...

Adeyemi, B S and Aigbavboa, C O (2020) Conflict factors investigation among construction professionals in Nigeria. Journal of Engineering, Design and Technology , 18(05), 1121–37.

Aghimien, D O, Aigbavboa, C O, Oke, A E and Thwala, W D (2019) Mapping out research focus for robotics and automation research in construction-related studies. Journal of Engineering, Design and Technology , 18(05), 1063–79.

Arowoiya, V A, Oke, A E, Aigbavboa, C O and Aliu, J (2020) An appraisal of the adoption internet of things (IoT) elements for sustainable construction. Journal of Engineering, Design and Technology, 18(05), 1193–208.

Asad, M M, Hassan, R B, Sherwani, F, Rind, I A and Maiji, Y (2019) Development of a novel safety and health educational management information system (HAZ-PRO) for oil and gas production operation. Journal of Engineering, Design and Technology , 18(05), 959–71.

Blindheim, J, Elverum, C W, Welo, T and Steinert, M (2020) Concept evaluation in new product development. Journal of Engineering, Design and Technology , 18(05), 1139–51.

Borer, J (2020) Object oriented design of safety critical programmable equipment systems. Journal of Engineering, Design and Technology , 18(05), 1081–9.

Chaparro, D A, Ying, F J, Rotimi, F E and Egbelakin, T (2020) Commute and labour productivity: investigation of inner city construction sites. Journal of Engineering, Design and Technology , 18(05), 1305–19.

Dave, N, Sahu, V and Misra, A K (2020) Development of geopolymer cement concrete for highway infrastructure applications. Journal of Engineering, Design and Technology , 18(05), 1321–33.

Davila Delgado, J M and Oyedele, L O (2020) BIM data model requirements for asset monitoring and the circular economy. Journal of Engineering, Design and Technology , 18(05), 1269–85.

Derradji, R and Hamzi, R (2020) Multi-criterion analysis based on integrated process-risk optimization. Journal of Engineering, Design and Technology , 18(05), 1015–35.

Eziefula, U G, Opara, H E and Eziefula, B I (2020) Strength of concrete produced with different sources of aggregates from selected parts of Abia and Imo States of Nigeria. Journal of Engineering, Design and Technology , 18(05), 1053–61.

Fei, C, Xiahou, P and Wang, F (2020) Design and control of grid connected inverter for harmonic suppression. Journal of Engineering, Design and Technology , 18(05), 1349–56.

Gamil, Y, A. Abdullah, M, Abd Rahman, I and Asad, M M (2020) Internet of things in construction industry revolution 4.0. Journal of Engineering, Design and Technology , 18(05), 1091–102.

Gbadamosi, S L and Nwulu, N I (2020) Optimal planning of renewable energy systems for power loss reduction in transmission expansion planning. Journal of Engineering, Design and Technology , 18(05), 1209–22.

Gharehbaghi, K, McManus, K, Hurst, N, Robson, K and Myers, M (2019) Complexities in mega rail transportation projects. Journal of Engineering, Design and Technology , 18(05), 973–90.

Gupta, N K and Thakre, G D (2020) Dry sliding wear performance on self-healing Al6061 composites. Journal of Engineering, Design and Technology , 18(05), 1357–70.

• Type: Journal Article
• Keywords: Optimization; Tribology; Taguchi method; Self-healing; Al6061; Metal composite;
• ISBN/ISSN: 1726-0531
• URL: https://doi.org/10.1108/JEDT-03-2020-0078
• Abstract:
  The purpose of this study is to investigate the tribological performance of the developed self-healing Al6061 composite and to optimize the operating conditions for enhanced tribo-performance of the developed material. A unique procedure has been adopted to convert the sand casted Al6061 into self-healing material by piercing a low melting point solder material with and without MoS₂. Taguchi-based L9 orthogonal array has been used to optimize the number of experiments and analyze the influence of operating parameters such as speed, sliding distance and load on material wear. The results reveal that the paper shows the self-healing and self-repair is possible in metal through piercing low melting point alloy. Then, the load has a significant influence over other input parameters in predicting the wear behavior of developed material. Moreover, addition of MoS₂ does not affect the tribo-performance of the developed material. The study concludes that the developed self-healing Al6061 has huge potential to be used in mechanical industry. The concept of self-healing in metals are very challenging task due to very slow diffusion rate of atoms at room temperature. Therefore, researchers are encouraged to explore the other new techniques to create self-healing in metals. The self-healing materials had shown huge potential to be used in mechanical industry. The current investigation established a structural fabrication and testing procedure to understand the effects of various parameters on wear. The conclusion from the experimentation and optimization helps researchers to developed and create self-healing in metals. The previous research works were not focused on the study of tribological property of self-healing metal composite. With the best of author’s knowledge, no one has reported tribological study, as well as optimization of parameters such as speed, load and sliding distance on wear in self-healing metals composite.

Jun, Z, Akbar, M A and Xin lei, W (2020) Optimization of design and measurement principle of six-components force/thrust measurement stand. Journal of Engineering, Design and Technology , 18(05), 1371–9.

Khamseh, A and Marei, P (2020) Designing a model developed to assess the capabilities of technological innovation in Iranian construction of power plant equipment industries. Journal of Engineering, Design and Technology , 18(05), 1241–9.

Li, H, Xia, Q, Wang, L and Ma, Y (2020) Sustainability assessment of urban water environment treatment public-private partnership projects using fuzzy logic. Journal of Engineering, Design and Technology , 18(05), 1251–67.

Mbae, A M and Nwulu, N I (2020) Day-ahead load forecasting using improved grey Verhulst model. Journal of Engineering, Design and Technology , 18(05), 1335–48.

Okampo, E J and Nwulu, N I (2020) Optimal energy mix for a reverse osmosis desalination unit considering demand response. Journal of Engineering, Design and Technology , 18(05), 1287–303.

Osman, B and Zhu, H (2020) A virtual educational model on a CNC milling machine including and excluding two methods of fuzzy controllers. Journal of Engineering, Design and Technology , 18(05), 1153–63.

Sibanda, V, Mpofu, K, Trimble, J and Kanganga, M (2019) Development of part families for a reconfigurable machine. Journal of Engineering, Design and Technology , 18(05), 991–1014.

Singh, T, Kalra, M and Misra, A K (2020) Simplified probabilistic seismic assessment of dampers in tall and braced structures in buildings. Journal of Engineering, Design and Technology , 18(05), 1037–52.

Wang, L (2020) Home intelligent lighting control system based on wireless sensor. Journal of Engineering, Design and Technology , 18(05), 1231–40.

Woju, U W and Balu, A (2020) Fuzzy uncertainty and its applications in reinforced concrete structures. Journal of Engineering, Design and Technology , 18(05), 1175–91.

Woju, U W and Balu, A (2020) Time-dependent safety performance of reinforced concrete structures. Journal of Engineering, Design and Technology , 18(05), 1103–20.

Xia, Y (2020) Research on dynamic data monitoring of steel structure building information using BIM. Journal of Engineering, Design and Technology , 18(05), 1165–73.

Yan, J (2020) 3D printing optimization algorithm based on back-propagation neural network. Journal of Engineering, Design and Technology , 18(05), 1223–30.

Zadok, Y (2019) Project-based learning in robotics meets junior high school. Journal of Engineering, Design and Technology , 18(05), 941–58.